{"product_id":"dji-ronin-4d-dual-rail-mount","title":"DJI Ronin 4D Dual Rail Mount","description":"\u003cp\u003e\u003cstrong\u003eGot a DJI Ronin 4D and need to run a focus motor and an iris motor? This is the solution.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe DJI Ronin 4D Dual Rail Mount is a dual 15mm rod mount that fits the Ronin 4D's LiDAR rail. It takes your own 15mm rods, so you can mount two focus or iris motors in the most secure way possible.\u003c\/p\u003e\n\u003cp\u003eIt comes in two clamp styles: Full Clamp for larger lenses, and Slim Clamp for compact lenses with a motor at the front and the back.\u003c\/p\u003e\n\u003cp\u003eIt's built for first ACs, DOPs and production houses who want to max out the R4D on serious productions. It's designed for cinema setups where the Ronin 4D's native single focus motor and the LiDAR aren't needed.\u003c\/p\u003e\n\u003ch2\u003eFull Clamp or Slim Clamp?\u003c\/h2\u003e\n\u003cp\u003eBoth are made from the same ABS carbon fibre, fit the LiDAR rail the same way and hold the rods at the same 54mm spacing. What changes is how much rod the mount grabs, where your motors can go, and the weight.\u003c\/p\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003c\/th\u003e\n\u003cth\u003eFull Clamp\u003c\/th\u003e\n\u003cth\u003eSlim Clamp\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDesigned for\u003c\/td\u003e\n\u003ctd\u003eLarger cinema lenses, longer rods\u003c\/td\u003e\n\u003ctd\u003eCompact lenses, motors front and back\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRod clamp length\u003c\/td\u003e\n\u003ctd\u003e51mm, the full depth of the mount\u003c\/td\u003e\n\u003ctd\u003e20.8mm, in the middle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eM4 bolts per rod\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRigidity\u003c\/td\u003e\n\u003ctd\u003eHighest\u003c\/td\u003e\n\u003ctd\u003eLess, one bolt over a shorter grip\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBare rod beside the clamp\u003c\/td\u003e\n\u003ctd\u003eNone\u003c\/td\u003e\n\u003ctd\u003e15mm front and back, with room round each rod for a motor clamp\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAccessory mount\u003c\/td\u003e\n\u003ctd\u003eFront\u003c\/td\u003e\n\u003ctd\u003eBack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight, mount only\u003c\/td\u003e\n\u003ctd\u003eUnder 60g\u003c\/td\u003e\n\u003ctd\u003eUnder 35g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eABS carbon fibre\u003c\/td\u003e\n\u003ctd\u003eABS carbon fibre\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eFull Clamp\u003c\/strong\u003e was designed for larger lenses. Two bolts per rod over the full 51mm hold the rods hardest against twisting and sliding. Pick it for big glass, longer rods running out to a motor further down the lens, or extra weight on the rods.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSlim Clamp\u003c\/strong\u003e is designed for more compact lenses, where the iris motor has to sit at the back, close to the camera. The clamp only takes the middle of each rod, so a motor can clamp on right beside the mount at either end: focus at the front, iris at the back. That means shorter rods and less overhang.\u003c\/p\u003e\n\u003cp\u003eThe trade-off is honest: with one bolt over a shorter grip, the Slim Clamp is less rigid than the Full Clamp. On a compact lens with short rods it is plenty. If you are hanging a heavy motor off long rods, get the Full Clamp.\u003c\/p\u003e\n\u003cp\u003eThe weight counts too. Everything on the lens mount rides on the R4D's gimbal, and the Slim Clamp weighs roughly half as much as the Full Clamp, about 25g less.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eTwo 15mm rod inserts: two M4 bolts per rod on the Full Clamp, one on the Slim Clamp\u003c\/li\u003e\n\u003cli\u003eUse your own 15mm rods and set your own length\u003c\/li\u003e\n\u003cli\u003eRun a focus motor and an iris motor\u003c\/li\u003e\n\u003cli\u003eAccessory mount: front on the Full Clamp, back on the Slim Clamp\u003c\/li\u003e\n\u003cli\u003eHeld to the LiDAR rail by an M4 bolt into a square nut that sits in the rail's own slot\u003c\/li\u003e\n\u003cli\u003eMade from high-quality, lightweight ABS carbon fibre\u003c\/li\u003e\n\u003cli\u003eCustom focus motor gears made on request, to suit the rod offset\u003c\/li\u003e\n\u003cli\u003eColour: black\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eA closer look\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0812\/6473\/8557\/files\/dji-ronin-4d-dual-rail-mount-features-upright.jpg?v=1794543531\" alt=\"DJI Ronin 4D Dual Rail Mount Full Clamp features: two 15mm rods, split rod clamp, 2 x M4 bolts per rod, ABS carbon fibre under 60g\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0812\/6473\/8557\/files\/dji-ronin-4d-dual-rail-mount-features-top-down.jpg?v=1794543531\" alt=\"DJI Ronin 4D Dual Rail Mount Full Clamp from above: fits the R4D LiDAR rail, M4 clamp bolts, square nut slots, set your own rod length\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eDimensions\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eClearance: the same as the base of the stock LiDAR rail on the lens mount\u003c\/li\u003e\n\u003cli\u003e15mm rod spacing: 54mm centre to centre\u003c\/li\u003e\n\u003cli\u003eRod centres: 10.1mm above the base of the mount\u003c\/li\u003e\n\u003cli\u003eTop height: 28.1mm from the base of the mount\u003c\/li\u003e\n\u003cli\u003eWidth: 78mm across the rods. Depth: 51mm along the rods\u003c\/li\u003e\n\u003cli\u003eRod clamp length: 51mm (Full Clamp), 20.8mm (Slim Clamp)\u003c\/li\u003e\n\u003cli\u003eWeight, mount only: under 60g (Full Clamp), under 35g (Slim Clamp)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCustom focus motor gears\u003c\/h2\u003e\n\u003cp\u003eThe rods sit at 54mm centres, so your motor gear may not line up with your lens gear the way it does on a standard 15mm bracket. We will make custom focus motor gears to accommodate the offset, on request. Just get in touch with your motor and lens.\u003c\/p\u003e\n\u003ch2\u003eIn the box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 x DJI Ronin 4D Dual Rail Mount, in the clamp style you choose\u003c\/li\u003e\n\u003cli\u003eRail hardware: 1 x M4 x 8 socket head screw and 1 x M4 square nut\u003c\/li\u003e\n\u003cli\u003eRod clamp hardware: 4 x M4 x 10 socket head screws and 4 x M4 square nuts (Full Clamp), or 2 of each (Slim Clamp)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCompatible with: DJI Ronin 4D LiDAR rail.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e15mm rods are not included. Fitting this mount requires removal of the LiDAR module.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch2\u003eQuestions\u003c\/h2\u003e\n\u003ch3\u003eWhich one should I get, Full Clamp or Slim Clamp?\u003c\/h3\u003e\n\u003cp\u003eCompact lens, with a focus motor at the front and an iris motor at the back? Slim Clamp. Larger lens, longer rods, or you want the most rigid hold? Full Clamp. Both fit the rail the same way and are made from the same ABS carbon fibre.\u003c\/p\u003e\n\u003ch3\u003eHow do I run two focus motors on a DJI Ronin 4D?\u003c\/h3\u003e\n\u003cp\u003eTake off the LiDAR module and fit this mount to the LiDAR rail. It holds two 15mm rods, so you can clamp a focus motor and an iris motor (or two focus motors) on the same camera.\u003c\/p\u003e\n\u003ch3\u003eAre 15mm rods included?\u003c\/h3\u003e\n\u003cp\u003eNo. Use your own 15mm rods and cut them to the length you want. All the M4 screws and square nuts are in the box.\u003c\/p\u003e\n\u003ch3\u003eWhat is the rod spacing?\u003c\/h3\u003e\n\u003cp\u003e54mm centre to centre on both clamp styles. The rod centres sit 10.1mm above the base of the mount.\u003c\/p\u003e\n\u003ch3\u003eWill my motor gear line up with my lens gear?\u003c\/h3\u003e\n\u003cp\u003eIt may not, because of the rod offset. We make custom focus motor gears to suit, on request. Tell us your motor and lens.\u003c\/p\u003e\n\u003ch3\u003eCan I keep using the LiDAR?\u003c\/h3\u003e\n\u003cp\u003eNo. The mount fits where the LiDAR module goes, so it is for setups that run external motors instead of the LiDAR and the native focus motor.\u003c\/p\u003e\n\u003ch3\u003eWhat is it made from and how much does it weigh?\u003c\/h3\u003e\n\u003cp\u003eABS carbon fibre, in black. Under 60g for the Full Clamp and under 35g for the Slim Clamp, mount only.\u003c\/p\u003e\n\u003ch3\u003eWhen does it ship?\u003c\/h3\u003e\n\u003cp\u003eBoth clamp styles are in stock and shipping now from Melbourne. We ship worldwide.\u003c\/p\u003e\n\u003ch2\u003eMore for the Ronin 4D\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/dji-ronin-4d-accessories\"\u003eAll DJI Ronin 4D accessories\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/dji-high-bright-monitor-hood\"\u003eDJI High Bright Monitor Hood\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/dji-ronin-4d-inverted-monitor-hood\"\u003eDJI Ronin 4D Inverted Monitor Hood\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/dji-ronin-4d-monitor-sleeve\"\u003eDJI Ronin 4D Monitor Sleeve\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/ronin-4d-e-mount-custom-body-cap\"\u003eRonin 4D E-Mount Custom Body Cap\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIn stock and shipping now. Ships worldwide.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe first two images are photos of the Full Clamp production part. The rest are renders.\u003c\/em\u003e\u003c\/p\u003e","brand":"3D Film Parts","offers":[{"title":"Full Clamp","offer_id":71897552650493,"sku":"R4D-DUAL-RAIL-MOUNT","price":64.0,"currency_code":"USD","in_stock":true},{"title":"Slim Clamp","offer_id":71926066675965,"sku":"R4D-DUAL-RAIL-MOUNT-SLIM","price":64.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0812\/6473\/8557\/files\/dji-ronin-4d-dual-rail-mount-photo-upright.jpg?v=1794543528","url":"https:\/\/www.3dfilmparts.com\/products\/dji-ronin-4d-dual-rail-mount","provider":"3D Film Parts","version":"1.0","type":"link"}