{"product_id":"samsung-t7-shield-mount","title":"Samsung T7 Shield Mount","description":"\u003cp\u003e\u003cstrong\u003eClamp a Samsung T7 Shield to any cheese plate.\u003c\/strong\u003e Slide the drive in, spin the thumb screw, and it is locked to your DigiPlate, iPad cage, laptop plate or cart. It doesn't have to be an Inovativ DigiPlate. Any plate with 3\/8\" holes works, because the screws sit in a slot you can move them along.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eA$49. Ships with two 3\/8\" shallow countersunk screws and one M5 thumb screw.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eAlready got a regular T7?\u003c\/strong\u003e You can still use this mount. Slip your drive into our \u003ca href=\"\/products\/samsung-t7-shield-sleeve\"\u003eSamsung T7 Shield Sleeve\u003c\/a\u003e and it takes the T7 Shield's shape, so it clamps in this mount the same way.\u003c\/p\u003e\n\n\u003ch2\u003eFits any cheese plate\u003c\/h2\u003e\n\u003cp\u003eThe base has a long countersunk slot for the two 3\/8\" screws. Slide them along the slot until they line up with the holes on your plate, then tighten them through the window on the front. No fixed hole spacing, so it works on a DigiPlate, a cheese plate, a cage or a rig.\u003c\/p\u003e\n\u003cp\u003eThe screws are shallow countersunk hex key screws. The heads sit flush, so nothing sticks out the back to scratch or foul your iPad or laptop.\u003c\/p\u003e\n\n\u003ch2\u003eThumb screw clamp\u003c\/h2\u003e\n\u003cp\u003eAn M5 thumb screw pulls the front wall onto the drive. The screw never presses on the drive itself, so it clamps firm without marking the Shield. Loosen it a turn and the drive slides out.\u003c\/p\u003e\n\n\u003ch2\u003eLocates on the Shield's profile\u003c\/h2\u003e\n\u003cp\u003eTwo grooves inside the mount locate the T7 Shield's own profile, so the drive sits square and in the same spot every time. Both ends are open, so you can run the USB-C cable out whichever side suits your setup.\u003c\/p\u003e\n\n\u003ch2\u003eGot a regular T7?\u003c\/h2\u003e\n\u003cp\u003ePut it in our \u003ca href=\"\/products\/samsung-t7-shield-sleeve\"\u003eSamsung T7 Shield Sleeve\u003c\/a\u003e. The sleeve gives a regular aluminium T7 the T7 Shield's shape, so it fits this mount too. Want your logo on it? The sleeve takes UV printing. The 3D Film Parts logo you see through the window in our photos is a UV printed sleeve.\u003c\/p\u003e\n\n\u003ch2\u003eABS glass fibre\u003c\/h2\u003e\n\u003cp\u003ePrinted in ABS glass fibre: stiff, strong, heat resistant and finished in matte black.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFits: Samsung T7 Shield, or a regular Samsung T7 in our T7 Shield Sleeve\u003c\/li\u003e\n\u003cli\u003eMounting: two 3\/8\" shallow countersunk hex key screws in a sliding slot (included)\u003c\/li\u003e\n\u003cli\u003eClamp: one M5 thumb screw (included)\u003c\/li\u003e\n\u003cli\u003eLocating: two grooves that match the T7 Shield's profile\u003c\/li\u003e\n\u003cli\u003eCable: open both ends for USB-C\u003c\/li\u003e\n\u003cli\u003eMaterial: ABS glass fibre, matte black\u003c\/li\u003e\n\u003cli\u003eMade in Melbourne, Australia by 3D Film Parts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eQuestions\u003c\/h2\u003e\n\u003ch3\u003eDo I need an Inovativ DigiPlate?\u003c\/h3\u003e\n\u003cp\u003eNo. Any cheese plate, cage or rig with 3\/8\" holes works. The screws slide along a slot to line up with your holes.\u003c\/p\u003e\n\u003ch3\u003eWill the screws scratch my iPad or laptop?\u003c\/h3\u003e\n\u003cp\u003eNo. They are shallow countersunk screws and the heads sit flush with the back of the plate.\u003c\/p\u003e\n\u003ch3\u003eDoes it fit a regular T7?\u003c\/h3\u003e\n\u003cp\u003eYes, in our \u003ca href=\"\/products\/samsung-t7-shield-sleeve\"\u003eSamsung T7 Shield Sleeve\u003c\/a\u003e. On its own, a regular T7 is too thin to clamp.\u003c\/p\u003e\n\u003ch3\u003eDoes the thumb screw press on my drive?\u003c\/h3\u003e\n\u003cp\u003eNo. It pulls the front wall onto the drive, so the screw never touches it.\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003e*Drive, sleeve, cables and plate not included.\u003c\/em\u003e\u003c\/p\u003e\n","brand":"3D Film Parts","offers":[{"title":"Default Title","offer_id":71991096967421,"sku":"T7-SHIELD-MOUNT","price":49.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0812\/6473\/8557\/files\/samsung-t7-shield-mount-1.jpg?v=1795161687","url":"https:\/\/www.3dfilmparts.com\/products\/samsung-t7-shield-mount","provider":"3D Film Parts","version":"1.0","type":"link"}