{"product_id":"tentacle-sync-e-camera-mount-v2","title":"Tentacle Sync E Camera Mount V2","description":"\u003cp\u003eThe Tentacle Sync E Camera Mount V2 holds your Tentacle Sync E timecode box on your camera, cage or cheese plate, in whatever orientation suits your build. It does the same job as our original mount with one change: the brass 1\/4\"-20 insert is gone. In its place is a countersunk through hole, and a 1\/4\"-20 countersunk screw comes with every holder.\u003c\/p\u003e\n\u003ch3\u003eWhy there is a V2\u003c\/h3\u003e\n\u003cp\u003eA threaded insert works well until you bolt it straight to a cage. You screw a male-to-male adapter into the mount, then into the cage, and wherever the thread runs out is the angle you are stuck with. On a tight build that is a real problem. Quick release clamps get around it by passing a bolt through the mount instead, so V2 does the same. You set the angle, then you tighten.\u003c\/p\u003e\n\u003ch3\u003eNew in V2\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternal countersink.\u003c\/strong\u003e The screw goes in from inside the holder and its head sits down in the countersink, recessed in the cavity wall. Countersunk gives the best durability and keeps a low profile, so nothing pokes into the space where your Tentacle sits.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1\/4\"-20 through bolt.\u003c\/strong\u003e The screw passes straight through the holder and into your cage or cheese plate.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5.5 mm Allen key hole.\u003c\/strong\u003e A single through hole on the front face lines up with the screw, so you can reach it from outside with an Allen key and tighten it onto your equipment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAny position, any orientation.\u003c\/strong\u003e Bolt it to your cage first, then turn the holder to any angle before you snug it up. Your timecode box ends up where you want it, not where the thread stops.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware included.\u003c\/strong\u003e One black 1\/4\"-20 countersunk socket screw with every holder.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow to fit it\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eDrop the screw into the holder from the inside so the head sits in the countersink.\u003c\/li\u003e\n\u003cli\u003eHold the holder against your cage, cheese plate or any 1\/4\"-20 thread at the angle you want.\u003c\/li\u003e\n\u003cli\u003ePut an Allen key through the 5.5 mm hole on the front face and tighten the screw.\u003c\/li\u003e\n\u003cli\u003eFit your Tentacle Sync E into the holder.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eSame as the original\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDurable black TPU with good weather resistance.\u003c\/li\u003e\n\u003cli\u003eCable management channels on both sides keep the timecode cable tidy, with no loose loops to snag on gear.\u003c\/li\u003e\n\u003cli\u003eTwo cable cut-out sizes to suit different timecode cable setups.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhich version do you need?\u003c\/h3\u003e\n\u003cp\u003eWant a fixed female 1\/4\"-20 thread in the base instead? The original \u003ca href=\"https:\/\/www.3dfilmparts.com\/products\/tentacle-sync-e-camera-mount-pair\"\u003eTentacle Sync E Camera Mount with the secure brass 1\/4\"-20 insert\u003c\/a\u003e is still available. It is the simpler choice when you are mounting onto a ball head, magic arm, hot shoe adapter or anything with a male thread. Choose V2 when you are bolting straight to a cage or cheese plate and need control over the final orientation.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with: Tentacle Sync E timecode device\u003c\/li\u003e\n\u003cli\u003eMounting: countersunk through hole for a 1\/4\"-20 screw (screw included)\u003c\/li\u003e\n\u003cli\u003eTool access: 5.5 mm through hole on the front face\u003c\/li\u003e\n\u003cli\u003eSize: 59 x 30.5 x 20 mm\u003c\/li\u003e\n\u003cli\u003eMaterial: black TPU\u003c\/li\u003e\n\u003cli\u003eColour: black only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat is in the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSingle: 1 holder and 1 countersunk 1\/4\"-20 screw\u003c\/li\u003e\n\u003cli\u003e2 Pack: 2 holders, 2 screws and a case\u003c\/li\u003e\n\u003cli\u003e4 Pack: 4 holders, 4 screws and a larger case\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"3D Film Parts","offers":[{"title":"Single","offer_id":71801139888381,"sku":"TENTICAL-V2","price":25.0,"currency_code":"AUD","in_stock":true},{"title":"2 Pack","offer_id":71801139921149,"sku":"TENTICAL-V2-2PK","price":40.0,"currency_code":"AUD","in_stock":true},{"title":"4 Pack","offer_id":71801139953917,"sku":"TENTICAL-V2-4PK","price":60.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0812\/6473\/8557\/files\/tentacle-sync-e-camera-mount-v2-with-screw.png?v=1793746453","url":"https:\/\/www.3dfilmparts.com\/products\/tentacle-sync-e-camera-mount-v2","provider":"3D Film Parts","version":"1.0","type":"link"}