{"product_id":"ugreen-4-port-usb-c-hub-mount","title":"UGREEN CM806 4-Port USB-C Hub Mount","description":"\u003cp\u003e\u003cstrong\u003eA mount kit for the UGREEN CM806 4-port USB-C hub with PD.\u003c\/strong\u003e Bolt the hub flat to a cheese plate, an Inovativ DigiPlate or an LSDigi iPad plate, and stop it hanging off the cart by its cables.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eYou get two mounts in one kit: the full-size mount and the low-profile dual end caps. Ships with two M4 thumb screws and two 1\/4\"-20 shallow countersunk bolts. Hub, cables and plate are not included.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0812\/6473\/8557\/files\/ugreen-hub-mount-whats-in-the-box.jpg?v=1795163510\" alt=\"What's in the box: the UGREEN hub full-size mount (long base and clamp bar) and the low-profile dual end caps, outlined in orange\" style=\"width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNeed power on the plate too?\u003c\/strong\u003e Pair it with our \u003ca href=\"\/products\/cinecharge-65-usb-c-a-power-hub\"\u003eCineCharge 65W x 4 USB Power Hub\u003c\/a\u003e. The CineCharge puts the power on your cart. This hub puts the data ports next to it.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull-size mount (2 pieces):\u003c\/strong\u003e one long base and one short clamp bar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo M4 thumb screws\u003c\/strong\u003e to lock the clamp bar and hold the hub in the mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-profile dual end caps (2 pieces):\u003c\/strong\u003e one cap for each end of the hub\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo 1\/4\"-20 shallow countersunk bolts\u003c\/strong\u003e, which fit either mount\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNot included: the UGREEN hub, cables or the plate.\u003c\/p\u003e\n\n\u003ch2\u003eFull-size mount\u003c\/h2\u003e\n\u003cp\u003eThe long base bolts to your plate through two slots with two 1\/4\"-20 shallow countersunk bolts, so the heads sit flush under the hub and you can slide it to line up with your holes. The hub slides in, and the short clamp bar locks it down with two M4 thumb screws. Undo the thumb screws and the hub comes out without touching the base. The port side stays fully open, so every plug goes straight in.\u003c\/p\u003e\n\n\u003ch2\u003eLow-profile dual end caps\u003c\/h2\u003e\n\u003cp\u003eTwo caps, one over each end of the hub. Each one has a slotted ear that takes a 1\/4\"-20 shallow countersunk bolt, so you can slide them to line up with the holes on your plate. It's the slimmest way to hold the hub, and it suits other devices of a similar size too, because the caps aren't tied to one spacing.\u003c\/p\u003e\n\n\u003ch2\u003eDigiPlate, cheese plate or LSDigi iPad plate\u003c\/h2\u003e\n\u003cp\u003eAnywhere with 1\/4\"-20 holes. In the photos it's on an Inovativ DigiPlate and an LSDigi iPad plate.\u003c\/p\u003e\n\n\u003ch2\u003ePETG carbon fibre\u003c\/h2\u003e\n\u003cp\u003ePrinted in PETG carbon fibre: stiff, tough and matte black. Made in Melbourne.\u003c\/p\u003e\n\n\u003ch2\u003eCheck your hub first\u003c\/h2\u003e\n\u003cp\u003eThis is sized to the UGREEN CM806 4-port USB-C hub with PD pass-through. Ours measures 104.3 x 39.2 x 12.2 mm on the calliper. If yours isn't a CM806, measure it before you order, or send us the model and we'll check it for you.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFits: UGREEN CM806 4-port USB-C hub with PD (104.3 x 39.2 x 12.2 mm)\u003c\/li\u003e\n\u003cli\u003eFull-size mount: long base + clamp bar, two M4 thumb screws\u003c\/li\u003e\n\u003cli\u003eEnd caps: two low-profile caps with slotted 1\/4\"-20 ears\u003c\/li\u003e\n\u003cli\u003eHardware included: two M4 thumb screws and two 1\/4\"-20 shallow countersunk bolts\u003c\/li\u003e\n\u003cli\u003eMaterial: PETG carbon fibre, black\u003c\/li\u003e\n\u003cli\u003eNot included: hub, cables, plate\u003c\/li\u003e\n\u003cli\u003eMade in Melbourne, Australia by 3D Film Parts\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"3D Film Parts","offers":[{"title":"Default Title","offer_id":71991254548733,"sku":"UGREEN-HUB-MOUNT","price":29.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0812\/6473\/8557\/files\/ugreen-hub-mount-end-caps-ipad-plate.jpg?v=1795163510","url":"https:\/\/www.3dfilmparts.com\/products\/ugreen-4-port-usb-c-hub-mount","provider":"3D Film Parts","version":"1.0","type":"link"}