5 Essential DJI Ronin 4D Accessories (Monitor Hood, SSD Cases & More)
The five DJI Ronin 4D accessories that earn their place fastest are a flexible monitor hood for glare-free framing, a 3 x SSD storage case to keep your media organised, an active cooling box that stops the DJI ProSSD throttling on ingest, a triple cold shoe mount to expand the top handle, and antenna extension mounts for cleaner DJI Transmission range. All five are 3D printed in Australia, purpose-built for the R4D, and priced between $30 and $99 AUD. Here is what each one does, why it matters, and where it earns its place on the rig.
In this article
- Why does the Ronin 4D need dedicated accessories?
- 1. How do I cut glare on the Ronin 4D monitor?
- 2. How do I keep my DJI SSDs organised and protected?
- 3. Why does my DJI ProSSD slow down, and how do I fix it?
- 4. How do I add more mounting points to the top handle?
- 5. How do I improve DJI Transmission range on a stand?
- Which Ronin 4D accessory should I buy first?
- Frequently asked questions
Purpose-built, 3D printed upgrades that make the Ronin 4D faster and more reliable on set.
Why does the Ronin 4D need dedicated accessories?
The DJI Ronin 4D is a remarkable all-in-one cinema camera, but it was built as a complete system, which means the aftermarket for it is small and most generic gear simply does not fit. The handle, the monitor and the DJI ProSSD all have their own shapes and quirks, so an accessory that is not modelled for the R4D either does not mount or gets in the way.
That is exactly where 3D printed parts shine. Each one is designed around a known surface on the camera, the exact handle, the exact SSD, the exact antenna, so it fits snugly, uses dead space, and solves a problem DJI never made a product for. The five below are the upgrades R4D operators reach for most.
1. How do I cut glare on the Ronin 4D monitor?
Bright daylight on the R4D monitor makes accurate framing and focus a guess. A monitor hood fixes that instantly by shading the screen so you see a true image. The DJI Ronin 4D Flexible Monitor Hood is our best-selling R4D accessory because it is moulded specifically for the camera: it has precision-cut access to every button, a cut-out so the tally light stays visible, and it works whether the monitor is centre-mounted or repositioned.
It is made from high-quality TPU, so it holds its shape but flexes with the rig instead of snapping on a fast-moving set. Beyond glare, a hood also helps shield the monitor from heat and knocks, and you can add optional laser marking to brand it as your own. See it in action below.
The Flexible Monitor Hood fitted to the DJI Ronin 4D.
Flexible TPU hood with full button access and a tally-light cut-out. Centre or repositioned monitor, optional laser marking.
2. How do I keep my DJI SSDs organised and protected?
The DJI ProSSD is fast, expensive, and easy to lose track of in a busy bag. The DJI PRO SSD Storage Case (3 x SSD) gives each drive a fixed, padded home: it holds up to three SSDs, or two SSDs and a USB-C cable, in a compact clamshell. The shell is durable PETG with a soft TPU insert moulded in as one piece, so drives sit snug and protected rather than rattling loose.
At 115 x 58 x 36mm it slips into any kit pocket, and a debossed panel on the lid lets you label or laser-engrave it with your name. For a single drive carried on-camera, the matching 1 x SSD case does the same job in a smaller footprint.
Holds up to 3 DJI SSDs, or 2 plus a USB-C cable, in a tough PETG clamshell with a moulded TPU insert. Debossed panel for labelling.
3. Why does my DJI ProSSD slow down, and how do I fix it?
If your DJI ProSSD slows down partway through an offload, heat is the usual cause. DJI confirms that overheating reduces an SSD's write performance, and recommends keeping the drive in a cool, well-ventilated setup with proper heat dissipation. The DJI ProSSD Active Cooling Box does exactly that: a front intake and top exhaust pull constant airflow across the drive so it holds its data rate instead of throttling mid-transfer.
It takes two SSDs at once, or one with the spare slot plugged to focus the airflow, and a green LED confirms the fan is running. The fan is near-silent from a metre away and runs off any 5V USB-C cable (no Power Delivery needed), so you can power it from a laptop or even a phone. For DITs and single operators offloading on the clock, it is the upgrade that saves real time.
Active airflow keeps the ProSSD cool so it holds its transfer speed. Two-SSD capacity, quiet fan, runs off any 5V USB-C.
4. How do I add more mounting points to the top handle?
The R4D top handle has nowhere near enough room for the transmitters, timecode boxes, monitors and microphones a real rig carries. The Triple Cold Shoe Mount adds three standard cold shoe positions to the handle without adding meaningful weight. It is made from TPU 95A, which gives it a key advantage over hard plastic: it will not crack if dropped or over-tightened, it grips accessories more securely, and crucially it will not risk cracking the R4D monitor if the screen closes onto the handle during a fast pack-down.
It comes in two fitments so you can match your build: one for the original DJI Ronin 4D top handle and one for the aftermarket Tilta top handle. Both ship with flush-fit 1/4"-20 countersunk screws and offer an optional Tentacle Sync E timecode holder combo.
Adds three cold shoe positions to the R4D top handle in flexible TPU 95A. Available for the original handle and the Tilta handle.
5. How do I improve DJI Transmission range on a stand?
When you run DJI's High-Gain Antenna Kit for video transmission, you want the antennas up high and clear of obstructions for the cleanest signal. The DJI Transmission Antenna Extension Mount (Pair) lets you mount the antennas on C-stands or any standard spigot, so you can raise and aim them rather than leaving them down at the transmitter.
Each mount secures with the included M5 thumb bolt, keeps the SMA connector nut captive for easy tightening, and is printed in glass-fibre-reinforced ABS for strength. It ships as a pair, with bigger discounts when you buy more than one set.
Mounts the DJI High-Gain antennas on C-stands or spigots to lift and aim them. Captive SMA nut, M5 thumb bolt, glass-fibre ABS.
Which Ronin 4D accessory should I buy first?
If you can only add one upgrade today, match it to your biggest pain point. Here is how the five compare on price, the problem they solve, and who benefits most.
| Accessory | Solves | Price (AUD) | Best for |
|---|---|---|---|
| Flexible Monitor Hood | Glare on the monitor | $79 | Every R4D operator |
| PRO SSD Case (3 x SSD) | Loose, unprotected drives | $30 | DITs, data wranglers |
| ProSSD Active Cooling Box | SSD throttling on ingest | $99 | DITs, single operators |
| Triple Cold Shoe Mount | Too few mounting points | $35 | Doc and run-and-gun rigs |
| Antenna Extension Mount | Weak transmission range | $39 | DJI Transmission users |
For most operators the monitor hood is the first buy, because better visibility helps every single shot. If you offload your own media, the cooling box pays for itself the first time a transfer does not stall, and the SSD case keeps that media safe in between. The cold shoe mount and antenna mounts are smaller spends that round out a working rig.
Frequently asked questions
Are 3D printed Ronin 4D accessories durable enough for professional use?
Yes. These parts are printed in materials chosen for the job: flexible TPU for the hood and cold shoe mounts so they absorb knocks instead of cracking, tough PETG for the SSD case, and glass-fibre-reinforced ABS for the antenna mounts. Because each part is modelled to fit a specific surface on the camera, the fit itself adds strength.
Why does my DJI ProSSD slow down during transfers?
Heat is the most common cause. DJI notes that overheating reduces an SSD's write performance and recommends keeping the drive cool and well ventilated. An active cooling box maintains constant airflow over the drive so it holds its data rate instead of throttling partway through an offload.
Does the monitor hood block any buttons or the tally light?
No. The Flexible Monitor Hood is moulded specifically for the Ronin 4D, with precision-cut access to every button and a dedicated cut-out so the tally light stays visible. It works whether the monitor is centre-mounted or repositioned.
Will the cold shoe mount fit my top handle?
It is made in two fitments. One is cut for the original DJI Ronin 4D top handle and one for the aftermarket Tilta top handle. Choose the version that matches your handle, and each adds three standard cold shoe positions for transmitters, timecode boxes, monitors or microphones.
What accessories does every Ronin 4D operator need?
It depends on your work, but a monitor hood for visibility and an SSD case for media are near-universal. If you handle your own offloads, add the ProSSD cooling box. If you build out the handle or run DJI Transmission, the cold shoe mount and antenna mounts finish the rig.
Built specifically for the DJI Ronin 4D
Affordable, 3D printed accessories designed around the R4D, its SSDs and its handle. Find the exact part for your rig.
Shop all Ronin 4D accessories →Designed and made by film crew, for film crew.