Got a DJI Ronin 4D and need to run a focus motor and an iris motor? This is the solution.
The DJI Ronin 4D Dual Rail Mount is a dual 15mm rod mount that fits the Ronin 4D's LiDAR rail. It takes your own 15mm rods, so you can mount two focus or iris motors in the most secure way possible.
It comes in two clamp styles: Full Clamp for larger lenses, and Slim Clamp for compact lenses with a motor at the front and the back.
It's built for first ACs, DOPs and production houses who want to max out the R4D on serious productions. It's designed for cinema setups where the Ronin 4D's native single focus motor and the LiDAR aren't needed.
Both are made from the same ABS carbon fibre, fit the LiDAR rail the same way and hold the rods at the same 54mm spacing. What changes is how much rod the mount grabs, where your motors can go, and the weight.
| Full Clamp | Slim Clamp | |
|---|---|---|
| Designed for | Larger cinema lenses, longer rods | Compact lenses, motors front and back |
| Rod clamp length | 51mm, the full depth of the mount | 20.8mm, in the middle |
| M4 bolts per rod | 2 | 1 |
| Rigidity | Highest | Less, one bolt over a shorter grip |
| Bare rod beside the clamp | None | 15mm front and back, with room round each rod for a motor clamp |
| Accessory mount | Front | Back |
| Weight, mount only | Under 60g | Under 35g |
| Material | ABS carbon fibre | ABS carbon fibre |
Full Clamp was designed for larger lenses. Two bolts per rod over the full 51mm hold the rods hardest against twisting and sliding. Pick it for big glass, longer rods running out to a motor further down the lens, or extra weight on the rods.
Slim Clamp is designed for more compact lenses, where the iris motor has to sit at the back, close to the camera. The clamp only takes the middle of each rod, so a motor can clamp on right beside the mount at either end: focus at the front, iris at the back. That means shorter rods and less overhang.
The trade-off is honest: with one bolt over a shorter grip, the Slim Clamp is less rigid than the Full Clamp. On a compact lens with short rods it is plenty. If you are hanging a heavy motor off long rods, get the Full Clamp.
The weight counts too. Everything on the lens mount rides on the R4D's gimbal, and the Slim Clamp weighs roughly half as much as the Full Clamp, about 25g less.


The rods sit at 54mm centres, so your motor gear may not line up with your lens gear the way it does on a standard 15mm bracket. We will make custom focus motor gears to accommodate the offset, on request. Just get in touch with your motor and lens.
Compatible with: DJI Ronin 4D LiDAR rail.
15mm rods are not included. Fitting this mount requires removal of the LiDAR module.
Compact lens, with a focus motor at the front and an iris motor at the back? Slim Clamp. Larger lens, longer rods, or you want the most rigid hold? Full Clamp. Both fit the rail the same way and are made from the same ABS carbon fibre.
Take off the LiDAR module and fit this mount to the LiDAR rail. It holds two 15mm rods, so you can clamp a focus motor and an iris motor (or two focus motors) on the same camera.
No. Use your own 15mm rods and cut them to the length you want. All the M4 screws and square nuts are in the box.
54mm centre to centre on both clamp styles. The rod centres sit 10.1mm above the base of the mount.
It may not, because of the rod offset. We make custom focus motor gears to suit, on request. Tell us your motor and lens.
No. The mount fits where the LiDAR module goes, so it is for setups that run external motors instead of the LiDAR and the native focus motor.
ABS carbon fibre, in black. Under 60g for the Full Clamp and under 35g for the Slim Clamp, mount only.
Both clamp styles are in stock and shipping now from Melbourne. We ship worldwide.
In stock and shipping now. Ships worldwide.
The first two images are photos of the Full Clamp production part. The rest are renders.
🇦🇺 Australia. $10 on orders under $99, free over $99.
🇺🇸🇨🇦 United States and Canada. Your import duties and clearance fees are prepaid by us before the parcel leaves Australia and are included in the shipping rate you pay at checkout. There is nothing further to pay on delivery.
🌏 Everywhere else. Your own country may charge import fees when the parcel arrives. What changed on 1 July
When your order ships
We pack Monday to Friday in Melbourne and ship with Australia Post. Order before 12:00pm AEST on a business day and your parts normally go out in 1 to 2 business days, often the next morning. During a big sale or a busy run that can stretch to 5 business days. That is the outside number, not the usual one.
How long it takes to reach you, counting from the day it ships:
These are estimates, not guarantees. Customs and peak periods add time.
If the tracking stops moving
Once your parcel lands in your country it is handed to your national postal service, and our tracking link often stops updating at that point. That is normal: it has not been lost, it has just changed hands. Take the same tracking number and put it into your own country's postal site, which is the live one.
European Union
Since 1 July 2026 every commercial parcel is assessed regardless of value. Your carrier collects import VAT plus a flat customs duty before delivery, and will contact you by SMS or email with the amount. Please give us a mobile number at checkout so they can reach you, because a parcel they cannot reach you about is sent back.
Full detail is on our shipping page.
Join the list for early access to new products, weekly deals, and exclusive offers.
You're in! Check your inbox for your 10% off code.
Redirecting you now...