GL.iNet Slate 7 Pro Mounting Bracket fitted to the router, touchscreen and ports showing
Every port open: PD USB-C, 2.5G WAN and LAN, USB 3.0, antennas up
Back of the bracket: hex vents and centre 1/4-20 brass thread
Base labels and Wi-Fi details readable through the hex windows
Bracket fitted, rubber feet caught in the end notches
Two counterbored 1/4-20 slots for cheese plates (screws not included)
Bracket from the top: slots, brass 1/4-20 insert and hex vents
ABS carbon fibre bracket with wide port cut-outs
Bracket upright showing the port windows and centre thread
GL.iNet Slate 7 Pro clicking into the 3D Film Parts mounting bracket, then shown from the back, screen and ports

GL.iNet Slate 7 Pro Mounting Bracket


  • In stock, ready to ship
  • Inventory on the way
Regular price$49.00
/
Shipping calculated at checkout.

Your travel router has a job on set. Give it a proper place to do it.

The GL.iNet Slate 7 Pro (GL-BE10000) Wi-Fi 7 Travel Router runs the whole network on a lot of sets: monitors, camera control, the DIT cart, video village. Most of the time it ends up taped to a cart, sitting on an apple box or hanging off its own cables. This bracket fixes that. Push the router in, hear the click, then bolt it wherever the signal needs to be: the cart, the cage, a magic arm or the top of a stand.

It is designed around this one router and nothing else. We 3D scanned the Slate 7 Pro, built the bracket from the scan, then printed, fitted and refined it until the fit was right.

The fit

Push the Slate 7 Pro in and the bracket wraps it. Notches at each end catch half of each rubber foot, so the router locks into place instead of sliding about. It snaps in, it stays in, and it lets go when you pull it out on purpose. No screws into the router, no tape and no Velcro.

Mount it your way

  • Centre 1/4"-20 thread, up to 8mm deep. A brass insert set into the base. Screw it straight onto a magic arm, ball head, stand spigot adapter or any male 1/4"-20.
  • Two counterbored 1/4"-20 slots. Drop screws through from the inside. The heads sit down in the counterbore, so nothing touches the router. The slots let you slide it along to line up with the holes on any cheese plate, cart rail or cage before you tighten.
  • Use the thread, the slots or both. The centre thread is the quickest swap. Both slots together are the most rigid, with no chance of it twisting.
  • Any way up. Flat on a cart shelf, upright on the side of a cage, hanging under a table or out on an arm. Turn the router whichever way gives the best signal.

Nothing blocked

  • Every port open. Wide cut-outs for the PD USB-C power, both 2.5G Ethernet ports (WAN and LAN) and the USB 3.0 data port. Ethernet cables and chunky USB-C plugs go straight in.
  • Room to breathe. Hexagon vents across the base line up with the router's own cooling vents, and the side grilles are left completely clear. Wi-Fi 7 runs warm. This lets it shed that heat.
  • Labels you can still read. The model, MAC address and default Wi-Fi details on the base show through the hex windows, so nobody has to unmount it to find the password.
  • Screen and antennas free. The touchscreen stays fully visible, and both antennas fold and raise as normal.

Built for set life

  • ABS carbon fibre. Stiff, tough and heat resistant. It won't soften in a hot car or on a sunny cart the way PLA can.
  • Very light. Under 55g, so it adds almost nothing to a cage or an arm.
  • Soft edges. Rounded outside edges that won't chew up your hands, your cables or the router.
  • Designed and made in Melbourne by 3D Film Parts.

Specifications

  • Compatible with: GL.iNet Slate 7 Pro (GL-BE10000)
  • Mounting: 1 x 1/4"-20 brass threaded insert (up to 8mm deep) and 2 x counterbored 1/4"-20 slots
  • Material: ABS carbon fibre, black
  • Weight: under 55g
  • Size: 98 x 94 x 46mm

In the box

  • 1 x GL.iNet Slate 7 Pro Mounting Bracket

1/4"-20 screws are not included (the screws in the photos are for illustration). The GL.iNet Slate 7 Pro router, power supply and cables are not included.

Questions

Does it fit the original Slate 7 or other GL.iNet routers?

No. It is made for the GL.iNet Slate 7 Pro (GL-BE10000) only.

Will it block any ports or vents?

No. Every port has its own wide cut-out, the base vents are open through the hex pattern and the side grilles are left clear.

How do I bolt it to a cheese plate?

Put two 1/4"-20 screws through the slots from the inside, line the bracket up with the plate's holes and tighten. Then click the router in.

Can I put it on a magic arm?

Yes. Screw the arm straight into the centre brass 1/4"-20 thread.

Are screws included?

No. Use your own 1/4"-20 screws, the same ones you use on your cage or cheese plate.

Shipping and delivery

🇦🇺 Australia. $10 on orders under $99, free over $99.
🇺🇸🇨🇦 United States and Canada. Your import duties and clearance fees are prepaid by us before the parcel leaves Australia and are included in the shipping rate you pay at checkout. There is nothing further to pay on delivery.
🌏 Everywhere else. Your own country may charge import fees when the parcel arrives. What changed on 1 July

When your order ships

We pack Monday to Friday in Melbourne and ship with Australia Post. Order before 12:00pm AEST on a business day and your parts normally go out in 1 to 2 business days, often the next morning. During a big sale or a busy run that can stretch to 5 business days. That is the outside number, not the usual one.

How long it takes to reach you, counting from the day it ships:

  • Australia, express: 1 to 2 business days
  • New Zealand and South East Asia: 3 to 7 business days
  • United States and Canada: 5 to 10 business days
  • United Kingdom and Europe: 5 to 12 business days
  • South America: 10 to 15 business days

These are estimates, not guarantees. Customs and peak periods add time.

If the tracking stops moving

Once your parcel lands in your country it is handed to your national postal service, and our tracking link often stops updating at that point. That is normal: it has not been lost, it has just changed hands. Take the same tracking number and put it into your own country's postal site, which is the live one.

European Union

Since 1 July 2026 every commercial parcel is assessed regardless of value. Your carrier collects import VAT plus a flat customs duty before delivery, and will contact you by SMS or email with the amount. Please give us a mobile number at checkout so they can reach you, because a parcel they cannot reach you about is sent back.

Full detail is on our shipping page.

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.


Recently viewed