Samsung T7 Shield Mount in black ABS glass fibre with M5 thumb screw and diamond screw window
Samsung T7 Shield Mount holding a T7 SSD on an iPad cage cheese plate
Samsung T7 Shield Mount with a UV printed T7 Shield Sleeve showing through the window, and two 3/8 countersunk screws
Samsung T7 Shield Mount top view with T7 SSD and two 3/8 screws
Samsung T7 Shield Mount open end and slot with two 3/8 shallow countersunk screws
Samsung T7 Shield Mount base with two 3/8 screws in the sliding countersunk slot
Samsung T7 Shield Mount for the T7 SSD, angled view with thumb screw
Samsung T7 Shield Mount with M5 thumb screw and two 3/8 shallow countersunk screws
Samsung T7 Shield Mount clamping a T7 SSD on a DigiPlate cheese plate

Samsung T7 Shield Mount


  • In stock, ready to ship
  • Inventory on the way
Regular price$49.00
/
Shipping calculated at checkout.

Clamp a Samsung T7 Shield to any cheese plate. Slide the drive in, spin the thumb screw, and it is locked to your DigiPlate, iPad cage, laptop plate or cart. It doesn't have to be an Inovativ DigiPlate. Any plate with 3/8" holes works, because the screws sit in a slot you can move them along.

A$49. Ships with two 3/8" shallow countersunk screws and one M5 thumb screw.

Already got a regular T7? You can still use this mount. Slip your drive into our Samsung T7 Shield Sleeve and it takes the T7 Shield's shape, so it clamps in this mount the same way.

Fits any cheese plate

The base has a long countersunk slot for the two 3/8" screws. Slide them along the slot until they line up with the holes on your plate, then tighten them through the window on the front. No fixed hole spacing, so it works on a DigiPlate, a cheese plate, a cage or a rig.

The screws are shallow countersunk hex key screws. The heads sit flush, so nothing sticks out the back to scratch or foul your iPad or laptop.

Thumb screw clamp

An M5 thumb screw pulls the front wall onto the drive. The screw never presses on the drive itself, so it clamps firm without marking the Shield. Loosen it a turn and the drive slides out.

Locates on the Shield's profile

Two grooves inside the mount locate the T7 Shield's own profile, so the drive sits square and in the same spot every time. Both ends are open, so you can run the USB-C cable out whichever side suits your setup.

Got a regular T7?

Put it in our Samsung T7 Shield Sleeve. The sleeve gives a regular aluminium T7 the T7 Shield's shape, so it fits this mount too. Want your logo on it? The sleeve takes UV printing. The 3D Film Parts logo you see through the window in our photos is a UV printed sleeve.

ABS glass fibre

Printed in ABS glass fibre: stiff, strong, heat resistant and finished in matte black.

Specifications

  • Fits: Samsung T7 Shield, or a regular Samsung T7 in our T7 Shield Sleeve
  • Mounting: two 3/8" shallow countersunk hex key screws in a sliding slot (included)
  • Clamp: one M5 thumb screw (included)
  • Locating: two grooves that match the T7 Shield's profile
  • Cable: open both ends for USB-C
  • Material: ABS glass fibre, matte black
  • Made in Melbourne, Australia by 3D Film Parts

Questions

Do I need an Inovativ DigiPlate?

No. Any cheese plate, cage or rig with 3/8" holes works. The screws slide along a slot to line up with your holes.

Will the screws scratch my iPad or laptop?

No. They are shallow countersunk screws and the heads sit flush with the back of the plate.

Does it fit a regular T7?

Yes, in our Samsung T7 Shield Sleeve. On its own, a regular T7 is too thin to clamp.

Does the thumb screw press on my drive?

No. It pulls the front wall onto the drive, so the screw never touches it.

*Drive, sleeve, cables and plate not included.

Shipping and delivery

🇦🇺 Australia. $10 on orders under $99, free over $99.
🇺🇸🇨🇦 United States and Canada. Your import duties and clearance fees are prepaid by us before the parcel leaves Australia and are included in the shipping rate you pay at checkout. There is nothing further to pay on delivery.
🌏 Everywhere else. Your own country may charge import fees when the parcel arrives. What changed on 1 July

When your order ships

We pack Monday to Friday in Melbourne and ship with Australia Post. Order before 12:00pm AEST on a business day and your parts normally go out in 1 to 2 business days, often the next morning. During a big sale or a busy run that can stretch to 5 business days. That is the outside number, not the usual one.

How long it takes to reach you, counting from the day it ships:

  • Australia, express: 1 to 2 business days
  • New Zealand and South East Asia: 3 to 7 business days
  • United States and Canada: 5 to 10 business days
  • United Kingdom and Europe: 5 to 12 business days
  • South America: 10 to 15 business days

These are estimates, not guarantees. Customs and peak periods add time.

If the tracking stops moving

Once your parcel lands in your country it is handed to your national postal service, and our tracking link often stops updating at that point. That is normal: it has not been lost, it has just changed hands. Take the same tracking number and put it into your own country's postal site, which is the live one.

European Union

Since 1 July 2026 every commercial parcel is assessed regardless of value. Your carrier collects import VAT plus a flat customs duty before delivery, and will contact you by SMS or email with the amount. Please give us a mobile number at checkout so they can reach you, because a parcel they cannot reach you about is sent back.

Full detail is on our shipping page.

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.


Recently viewed