UGREEN 4-port USB-C hub held by the low-profile dual end caps on an LSDigi iPad plate
Full-size UGREEN hub mount on an Inovativ DigiPlate, two 1/4-20 shallow countersunk bolts and the clamp bar with two M4 thumb screws
Full-size mount holding the UGREEN hub with all four USB-C ports open and cabled
Low-profile dual end caps close up on an LSDigi iPad plate
UGREEN hub in the end caps on an iPad plate rigged on a stand
Low-profile end caps holding the UGREEN hub, angled view
UGREEN hub mount in a full DigiPlate DIT setup
What&

UGREEN CM806 4-Port USB-C Hub Mount


  • In stock, ready to ship
  • Inventory on the way
Regular price$29.00
/
Shipping calculated at checkout.

A mount kit for the UGREEN CM806 4-port USB-C hub with PD. Bolt the hub flat to a cheese plate, an Inovativ DigiPlate or an LSDigi iPad plate, and stop it hanging off the cart by its cables.

You get two mounts in one kit: the full-size mount and the low-profile dual end caps. Ships with two M4 thumb screws and two 1/4"-20 shallow countersunk bolts. Hub, cables and plate are not included.

What's in the box: the UGREEN hub full-size mount (long base and clamp bar) and the low-profile dual end caps, outlined in orange

Need power on the plate too? Pair it with our CineCharge 65W x 4 USB Power Hub. The CineCharge puts the power on your cart. This hub puts the data ports next to it.

What's in the box

  • Full-size mount (2 pieces): one long base and one short clamp bar
  • Two M4 thumb screws to lock the clamp bar and hold the hub in the mount
  • Low-profile dual end caps (2 pieces): one cap for each end of the hub
  • Two 1/4"-20 shallow countersunk bolts, which fit either mount

Not included: the UGREEN hub, cables or the plate.

Full-size mount

The long base bolts to your plate through two slots with two 1/4"-20 shallow countersunk bolts, so the heads sit flush under the hub and you can slide it to line up with your holes. The hub slides in, and the short clamp bar locks it down with two M4 thumb screws. Undo the thumb screws and the hub comes out without touching the base. The port side stays fully open, so every plug goes straight in.

Low-profile dual end caps

Two caps, one over each end of the hub. Each one has a slotted ear that takes a 1/4"-20 shallow countersunk bolt, so you can slide them to line up with the holes on your plate. It's the slimmest way to hold the hub, and it suits other devices of a similar size too, because the caps aren't tied to one spacing.

DigiPlate, cheese plate or LSDigi iPad plate

Anywhere with 1/4"-20 holes. In the photos it's on an Inovativ DigiPlate and an LSDigi iPad plate.

PETG carbon fibre

Printed in PETG carbon fibre: stiff, tough and matte black. Made in Melbourne.

Check your hub first

This is sized to the UGREEN CM806 4-port USB-C hub with PD pass-through. Ours measures 104.3 x 39.2 x 12.2 mm on the calliper. If yours isn't a CM806, measure it before you order, or send us the model and we'll check it for you.

Specifications

  • Fits: UGREEN CM806 4-port USB-C hub with PD (104.3 x 39.2 x 12.2 mm)
  • Full-size mount: long base + clamp bar, two M4 thumb screws
  • End caps: two low-profile caps with slotted 1/4"-20 ears
  • Hardware included: two M4 thumb screws and two 1/4"-20 shallow countersunk bolts
  • Material: PETG carbon fibre, black
  • Not included: hub, cables, plate
  • Made in Melbourne, Australia by 3D Film Parts

Shipping and delivery

🇦🇺 Australia. $10 on orders under $99, free over $99.
🇺🇸🇨🇦 United States and Canada. Your import duties and clearance fees are prepaid by us before the parcel leaves Australia and are included in the shipping rate you pay at checkout. There is nothing further to pay on delivery.
🌏 Everywhere else. Your own country may charge import fees when the parcel arrives. What changed on 1 July

When your order ships

We pack Monday to Friday in Melbourne and ship with Australia Post. Order before 12:00pm AEST on a business day and your parts normally go out in 1 to 2 business days, often the next morning. During a big sale or a busy run that can stretch to 5 business days. That is the outside number, not the usual one.

How long it takes to reach you, counting from the day it ships:

  • Australia, express: 1 to 2 business days
  • New Zealand and South East Asia: 3 to 7 business days
  • United States and Canada: 5 to 10 business days
  • United Kingdom and Europe: 5 to 12 business days
  • South America: 10 to 15 business days

These are estimates, not guarantees. Customs and peak periods add time.

If the tracking stops moving

Once your parcel lands in your country it is handed to your national postal service, and our tracking link often stops updating at that point. That is normal: it has not been lost, it has just changed hands. Take the same tracking number and put it into your own country's postal site, which is the live one.

European Union

Since 1 July 2026 every commercial parcel is assessed regardless of value. Your carrier collects import VAT plus a flat customs duty before delivery, and will contact you by SMS or email with the amount. Please give us a mobile number at checkout so they can reach you, because a parcel they cannot reach you about is sent back.

Full detail is on our shipping page.

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.


Recently viewed