DJI Ronin 4D monitor cover with example UV printed logo - 3D Film Parts
Ronin 4D monitor cover snapped onto the monitor, close up - 3D Film Parts
DJI Ronin 4D monitor cover video: snap on, 1.2 mm air gap, pops off - 3D Film Parts
DJI Ronin 4D with the monitor cover fitted, on a table - 3D Film Parts
Ronin 4D monitor cover fitted on the camera - 3D Film Parts
Snap-on Ronin 4D monitor cover, angled view on the camera - 3D Film Parts
Edge view of the slim Ronin 4D monitor cover - 3D Film Parts
Back of the Ronin 4D monitor stays clear with the cover fitted - 3D Film Parts
Ronin 4D monitor cover beside the camera - 3D Film Parts
Inside of the Ronin 4D monitor cover, shaped to clear the glass - 3D Film Parts
Inside view of the PETG Ronin 4D monitor cover - 3D Film Parts

DJI Ronin 4D Monitor Cover


  • In stock, ready to ship
  • Inventory on the way
Regular price $39.00 Sale price$29.00 Save $10.00
/
Shipping calculated at checkout.

The slimmest way to protect your DJI Ronin 4D monitor. A precision snap-on cover for the Ronin 4D main monitor that clicks on in a second, stays put in the bag and pops off when it's time to shoot. Printed in tough, semi-flexible PETG and under 40 g, you will forget it's there until it saves your screen.

Launch price: A$29 for the first week, then A$39. We have an abundance of stock on the shelf in Melbourne, ready to ship worldwide.

Why you'll want one

  • 1.2 mm air gap over the glass. The cover never touches the screen. Grit or dust that lands on the glass is not ground into it, and small particles simply fall out the edges when you take the cover off.
  • Precision snap fit. Modelled from a 3D scan of the real monitor, so it clicks on with a satisfying snap and stays on. A pull tab lets it pop off in seconds.
  • Weighs next to nothing. Under 40 g. No extra bulk on the rig, no extra weight on the gimbal.
  • Front only. It covers the screen face and leaves the back, the cable and the mount alone. The HOME and DISP buttons, the dial and the side buttons all sit clear.
  • Tough, semi-flexible PETG. Flexes enough to snap on and off without stress, stiff enough to take a knock in the case.
  • Slim and compact. Leave it on in the bag, on the cart or between setups. It adds almost nothing to the monitor.

Your logo on it

Every cover ships blank. The logo in our photos is an example of our UV printing, so you can see what your own branding looks like.

  • UV printing: full colour, up to 80% of the front face.
  • Laser marking: a clean single-tone mark, up to 110 x 110 mm.

Tick the marking option above and upload your artwork. We will send a proof before anything is marked. Great for rental houses, production companies and owner-operators who want their kit easy to spot on set.

Cover, hood or sleeve?

  • Monitor Cover (this one): the lightest, slimmest and most affordable option. Protects the screen between shots and in the bag. You take it off to shoot.
  • DJI Ronin 4D Flexible Monitor Hood: a sun hood you shoot with. Blocks glare so you can see your image outdoors.
  • DJI Ronin 4D Monitor Sleeve: if you want something more protective. A TPU sleeve with fuller coverage of the monitor.

Browse the full range in DJI Ronin 4D Accessories and Monitor Hood Solutions.

Specifications

  • Fits: DJI Ronin 4D main monitor (Ronin 4D 6K and 8K)
  • Material: PETG, semi-flexible
  • Weight: under 40 g
  • Screen clearance: 1.2 mm air gap, never touches the glass
  • Coverage: front face only; back, cable and mount stay clear
  • Finish: ships blank; UV printing or laser marking optional
  • Made in Melbourne, Australia by 3D Film Parts

Questions

How much does it weigh?

Under 40 g. It is the lightest protection we make for the Ronin 4D monitor.

Does the cover touch the screen?

No. There is a 1.2 mm air gap between the cover and the glass, so dust or grit on the screen is not rubbed in. Small particles fall out the edges naturally.

Can I shoot with the cover on?

No, it is a protective cover for transport and downtime between setups. For shooting outdoors, the Flexible Monitor Hood is the one you want.

How does it attach?

It snaps over the front of the monitor with a precision fit and stays on. Use the pull tab to pop it off in seconds. No tools, no adhesive.

Does it fit the Ronin 4D 6K and 8K?

Yes. Both use the same main monitor, and the cover is shaped to it.

Will it block the buttons or the dial?

No. The HOME and DISP buttons, the dial and the side buttons all sit clear, and the back of the monitor and the cable are left alone.

Does it come with the logo in the photos?

No, every cover ships blank. The logo shows what our UV printing looks like. You can add your own logo with UV printing (up to 80% of the front face) or laser marking (up to 110 x 110 mm).

What is it made from?

PETG, a tough, semi-flexible material that handles the snap on and off and the knocks of life in a camera case.

Cover or sleeve: which should I get?

Get the cover if you want the slimmest, lightest and most affordable screen protection. If you want something more protective that wraps the whole monitor, get the Ronin 4D Monitor Sleeve.

Is it in stock?

Yes, we have plenty of stock ready to ship from Melbourne, Australia, with worldwide delivery.

Learn more: DJI Ronin 4D accessories guide · Camera monitor hoods explained · UV printing on 3D printed camera parts

Shipping and delivery

🇦🇺 Australia. $10 on orders under $99, free over $99.
🇺🇸🇨🇦 United States and Canada. Your import duties and clearance fees are prepaid by us before the parcel leaves Australia and are included in the shipping rate you pay at checkout. There is nothing further to pay on delivery.
🌏 Everywhere else. Your own country may charge import fees when the parcel arrives. What changed on 1 July

When your order ships

We pack Monday to Friday in Melbourne and ship with Australia Post. Order before 12:00pm AEST on a business day and your parts normally go out in 1 to 2 business days, often the next morning. During a big sale or a busy run that can stretch to 5 business days. That is the outside number, not the usual one.

How long it takes to reach you, counting from the day it ships:

  • Australia, express: 1 to 2 business days
  • New Zealand and South East Asia: 3 to 7 business days
  • United States and Canada: 5 to 10 business days
  • United Kingdom and Europe: 5 to 12 business days
  • South America: 10 to 15 business days

These are estimates, not guarantees. Customs and peak periods add time.

If the tracking stops moving

Once your parcel lands in your country it is handed to your national postal service, and our tracking link often stops updating at that point. That is normal: it has not been lost, it has just changed hands. Take the same tracking number and put it into your own country's postal site, which is the live one.

European Union

Since 1 July 2026 every commercial parcel is assessed regardless of value. Your carrier collects import VAT plus a flat customs duty before delivery, and will contact you by SMS or email with the amount. Please give us a mobile number at checkout so they can reach you, because a parcel they cannot reach you about is sent back.

Full detail is on our shipping page.

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.

Frequently Bought Together


Recently viewed