Profoto B10 Series Rugged Battery Case - Holds 4 Batteries
- In stock, ready to ship
- Inventory on the way
A slim hard case that holds four Profoto B10 series batteries, each in its own soft TPU pocket. It fits the battery Profoto sells for the B10, B10 Plus, B10X, B10X Plus, B20 and B30 (Profoto product number 100440). That is one battery across all six lights, so if your light is on that list, your batteries fit. Black case, white insert, A$89. Batteries are not included.
WHAT YOU GET
- Black case (base and lid) in carbon fibre PETG
- White TPU insert with four battery pockets
- White TPU lid liner, 2 mm thick, fitted
- TPU seal around the rim
- Two white latches
- Six stainless steel M3 x 30 mm screws, fitted. The case arrives assembled.
It comes one way only: black case, white insert. The case does not include the Profoto logo. However, you can upload your artwork for us to laser engrave or UV print on it.
HOW IT HOLDS THE BATTERIES
The four batteries lie flat, two by two. Each pocket is cut to the battery with 0.5 mm of clearance a side, so a battery drops in and does not slide about. There is a finger notch beside every pocket, so you can lift one battery out without tipping the case over.
The lid is lined with 2 mm of TPU that sits on top of the batteries when the case is shut. That is what stops the rattle. Every battery is in its own pocket, so the terminals cannot touch another battery or the loose metal in your bag.
SLIM ON PURPOSE
The battery is 41 mm tall. The closed case is about 49 mm. The footprint is about 185 x 183 mm, so it lies flat in a lighting bag or stands on its edge on a shelf.
The trade-off: this is a slim storage and transport case, not a flight case. The TPU seal keeps dust and grit out. It is not IP rated, so do not treat it as waterproof.
WHICH BATTERIES FIT
Profoto makes one battery for this family, the Li-Ion Battery 4S1P (product number 100440, 14.4 V, 43.2 Wh). Profoto lists it for:
- Profoto B10
- Profoto B10 Plus
- Profoto B10X
- Profoto B10X Plus
- Profoto B20
- Profoto B30
We 3D scanned a B10 battery at 82.5 x 74.7 x 40.3 mm and cut the pockets to 83.5 x 75.75 mm.
It does not fit Profoto A-series flash batteries or B1 and B1X batteries. Those are different shapes. For A-series batteries see the Profoto A-Series Battery 4 Bay Storage. Third-party copies of the B10 battery are not tested. If that is what you have, email us the measurements before you order and we will tell you straight.
YOUR LOGO ON THE LID
The case does not include the Profoto logo. However, you can upload your artwork for us to laser engrave or UV print on it. The lid is a flat panel, so it takes a logo well. Tick UV Printing Service or Laser Marking Service above and upload your artwork before you add the case to your cart.
- UV printing: full colour, laid down in layers and cured hard, with a raised finish you can feel. A white base goes down first so colours stay true on the black lid.
- Laser marking: a single-tone mark cut into the surface. No colour, permanent.
Worth doing if you run a rental house or a studio with a shelf of identical cases, or if you want your kit to come back to you.
NO CASE? COVER THE TERMINALS INSTEAD
If your batteries travel loose and you do not want a case, the Profoto B10 Series Battery snap-on covers clip over the terminals. A$20 a pair, in black or white. The rest of the range is in the Profoto collection.
MATERIALS AND SIZE
- Holds: 4 x Profoto Li-Ion Battery 4S1P (Profoto product number 100440)
- Fits the battery from: Profoto B10, B10 Plus, B10X, B10X Plus, B20, B30
- Outside, closed: about 185 x 183 x 49 mm
- Pockets: four, 83.5 x 75.75 mm each, in a 2 x 2 layout
- Case (base and lid): carbon fibre PETG, black
- Insert: TPU, white
- Lid liner: TPU, white, 2 mm
- Seal: TPU
- Latches: two, white
- Hardware: six stainless steel M3 x 30 mm socket head screws
- Colours: black case with white insert only
- 3D printed at 0.2 mm layers, then assembled and checked by 3D Film Parts in Melbourne, Australia
- Batteries not included
QUESTIONS
Which Profoto lights use the battery this case holds?
The B10, B10 Plus, B10X, B10X Plus, B20 and B30. They all use the same battery, Profoto product number 100440.
How many Profoto B10 batteries does the case hold?
Four. Each one has its own pocket.
Will the batteries rattle?
No. The pockets have 0.5 mm of clearance a side and a 2 mm TPU liner in the lid sits on top of the batteries when the case is closed.
Is the case waterproof?
No. It has a TPU seal that keeps dust and grit out, but it is not IP rated.
Does the case come with the Profoto logo on it?
No. The case does not include the Profoto logo. You can upload your own artwork for us to laser engrave or UV print on the lid.
Can I get my logo on it?
Yes. Choose UV printing for full colour or laser marking for a permanent single-tone mark, and upload your artwork on the product page.
Does it come in other colours?
No. It is black with a white insert.
Does it fit Profoto A-series or B1X batteries?
No. Those batteries are a different shape.
How big is the case?
About 185 x 183 x 49 mm closed.
Are batteries included?
No. This is the case only.
Shipping and delivery
🇦🇺 Australia. $10 on orders under $99, free over $99.
🇺🇸🇨🇦 United States and Canada. Your import duties and clearance fees are prepaid by us before the parcel leaves Australia and are included in the shipping rate you pay at checkout. There is nothing further to pay on delivery.
🌏 Everywhere else. Your own country may charge import fees when the parcel arrives. What changed on 1 July
When your order ships
We pack Monday to Friday in Melbourne and ship with Australia Post. Order before 12:00pm AEST on a business day and your parts normally go out in 1 to 2 business days, often the next morning. During a big sale or a busy run that can stretch to 5 business days. That is the outside number, not the usual one.
How long it takes to reach you, counting from the day it ships:
- Australia, express: 1 to 2 business days
- New Zealand and South East Asia: 3 to 7 business days
- United States and Canada: 5 to 10 business days
- United Kingdom and Europe: 5 to 12 business days
- South America: 10 to 15 business days
These are estimates, not guarantees. Customs and peak periods add time.
If the tracking stops moving
Once your parcel lands in your country it is handed to your national postal service, and our tracking link often stops updating at that point. That is normal: it has not been lost, it has just changed hands. Take the same tracking number and put it into your own country's postal site, which is the live one.
European Union
Since 1 July 2026 every commercial parcel is assessed regardless of value. Your carrier collects import VAT plus a flat customs duty before delivery, and will contact you by SMS or email with the amount. Please give us a mobile number at checkout so they can reach you, because a parcel they cannot reach you about is sent back.
Full detail is on our shipping page.
